Extend Gel Non-Wipe
Extend Gel Non-Wipe
Extend Gel Non-Wipe is a HEMA-free, vegan, cruelty-free formula that also finishes non-wipe, leading to easier, faster, and better Gel-X sets.
SKU:AP-1EXNW15Couldn't load pickup availability
Say goodbye forever to tackiness and dust on the underside of Gel-X® Tips!
Introducing Extend Gel Non-Wipe, the world’s first HEMA-free, vegan, and cruelty-free formula that is also NON-WIPE. No longer do you or your clients need to worry about fuzzies or debris sticking to the nails. With Extend Gel Non-Wipe, the underside of your Gel-X® Tips will remain clean and dust free thanks to the slick, non-wipe finish. Each bottle includes our revolutionary Brush-X that allows for easy precise application. Extend Gel Non-Wipe will last 3-4 weeks with proper prep and application and can be easily soaked off with acetone.
WHAT YOU'LL GET
- 15ml or 30ml matte gold bottle of Extend Gel Non-Wipe
FEATURES
- HEMA-free
- Non-Wipe
- Vegan
- Cruelty-free
- Non-yellowing of natural nails
- Medium viscosity gel
PRO TIPS!
- When flash curing on thin or sensitive nails with the Omni Light, cure from a slight distance.
- When full curing on thin or sensitive nails with the Alpha or Beta LED Lamps, chose the 45 second cure button for a gradual build up of intensity.
DIRECTIONS
Apply a thin layer of Extend Gel Non-Wipe onto the entire nail bed after light prep. Cure for 30 seconds. Apply Extend Gel Non-Wipe to the underside of the Gel-X® Tip and carefully apply the Gel-X® Tip onto the nail bed. Use LED mini light to cure for 10 seconds. After a set of 5 fingers is completed, cure the entire hand in LED lamp for 30 seconds or 2 minutes in UV Light.
HOW TO USE OMNI LIGHT SAFELY
For happy curing, always adhere to these guidelines to ensure safety and to prolong the lifespan of the Omni Light battery. Before charging and using your Omni Light, make sure you’re doing it safely.
How to Charge Omni Light
1. Always use the charger that comes with Omni Light.
Use the certified 5V2A charger that comes with the Omni Light – other chargers can cause damage to the battery or pose safety hazards.
2. Do not overcharge Omni Light.
Disconnect the Omni Light from its charger once it is fully charged. Do not leave Omni Light charging continuously for extended periods (unplug within 1-2 hours after full charge) to prevent overheating, reduced performance, or safety risks.
3. Promptly recharge Omni Light when it runs out of battery.
Do not allow the Omni Light to remain at 0% battery for prolonged periods, as this may damage the battery or cause charging failure. Recharge promptly when the battery is low.
4. Don’t leave Omni Light to charge unattended.
Stay near the Omni Light while charging to detect abnormalities such as overheating, unusual odors, or noises. In the event of charging abnormalities, unplug the device first to mitigate risks.
5. Don’t use Omni Light while it’s charging.
Refrain from high-power tasks during charging to minimize overheating or charging irregularities.
Where to Charge Omni Light
1. Not too hot, not too cold.
Do not charge Omni Light in environments above 40°C (104°F) or under direct sunlight (e.g., in cars, near heaters) to prevent overheating or explosion risks. Similarly, charging in temperatures below 0°C (32°F) may impair battery performance. Charge within a moderate temperature range (10°C-30°C / 50°F-86°F).
2. Make sure there’s good ventilation.
Charge Omni Light in a dry, well-ventilated area. Avoid charging Omni Light on beds, under blankets, or in enclosed spaces to prevent heat buildup.
3. Don’t store Omni Light in high heat.
Do not store the device in high-temperature environments (e.g., a car in summer) to prevent safety hazards.
4. Keep Omni Light away from liquids and metals.
Keep metal objects (e.g., keys, coins) away from the charging port to avoid short circuits. Protect the device and charger from water or liquids.
5. Recharge Omni Light when not in regular use.
If the Omni Light is unused for extended periods, charge it at least once every three months to prevent battery failure due to self-discharge.
What to Do if Omni Light Charges Irregularly
1. If Omni Light overheats…
Immediately stop charging if the Omni Light or charger overheats abnormally. Check the charger and power outlet for issues.
2. If Omni Light has battery swelling, odors, or deformation…
Discontinue use immediately if the battery bulges, emits unusual odors, or deforms. Contact Customer Service for assistance — do NOT continue charging or using the device.
3. If charging fails…
If the Omni Light fails to charge, test with a different charger. If unresolved, contact Customer Service immediately.
Customer Reviews
The brush on this is just so perfect ..makes it so much easier to work with the product! I’m so happy with my purchase. I’m self taught since a little before covid hit I found Apres and this product made things easier for me! I totally recommend it! I don’t see myself going back to using the regular extend gel! Which is a bummer because I still have a good amount of product from the OG! Hopefully they come out with brush replacements for the OG extend gel. The brush is just like the nail polish round and perfect to get near the cuticle area and sides! It was less messy and the sticky residue wasn’t there anymore loved that I didn’t have to go that extra step and put clear coat under the nail… this is A MUST purchase!
I have ordered the apres gel system a few times now. But the last order I placed I received an empty bottle of the apres nail primer. This has never happened before but I am disappointed this time.
Same product we all know and love without the mess afterwards!
Love the thin application brush. The formula is easy to work with and not too thick or runny. Perfect consistency and removal was not a pain like the other gel x nail gel glue.
I love that this product. No more lint under my nails
